AR Fiberglass Water Dispersed Chopped Strand
Our alkali resistant fiberglass water dispersed chopped strand applied with water-dispersed size, the strand will disperse well to filaments in water in10 seconds, and also disperse fast, appliance amount less, enlarge strength.
It is typically used in a small amount to prevent cracking and to improve the performance of ready mix concrete, gypsum or other special mortar mixes. It can be used for surface crack - proof of GRC products.Properties
Disperse fast, low dosages, harmless.
Package and StoragePackage:
20kgs/kraft bag, 50 bags/pallet, 20 pallets/20'FCL(on 2 levels), total net weight for approximately 18 tons.
Other packing methods are available, according to customers' requirements.Storage:
AR fiberglass water dispersed chopped strand should be stored dry in their original package, the best conditions being at a temperature of between 15 and 35, and at a relative humidity of between 35 and 65%. If the product is stored at low temperature (below 15), it is advisable to condition in the workshop for 24 hours before use to prevent condensation.
|Product code||Strand tex(tex)||Filament dia(μm)||Moisture content(%) ||Size content(%) ||Breaking Strength(N/tex) ||Zirconia Content(%) |
| ARC11-50-(3-30mm)HD|| 50||11||<0.5||0.6-1.0||≥ 0.30 ||≥ 16.5% |