GFRC AR/ARG Fiberglass Premix & Water Dispersed Chopped Strand
Our alkali resistant fiberglass water dispersed chopped strand applied with water-dispersed size, the strand will disperse well to filaments in water in10 seconds, and also disperse fast, appliance amount less, enlarge strength.
It is typically used in a small amount to prevent cracking and to improve the performance of ready mix concrete, gypsum or other special mortar mixes. It can be used for surface crack - proof of GRC products.
Properties:
Disperse fast, low dosages, harmless.
Package and Storage
Package:
20kgs/kraft bag, 50 bags/pallet, 20 pallets/20'FCL(on 2 levels), total net weight for approximately 18 tons.
Other packing methods are available, according to customers' requirements.
Storage:
GRC Water Dispersed Chopped Strand should be stored dry in their original package, the best conditions being at a temperature of between 15 and 35, and at a relative humidity of between 35 and 65%. If the product is stored at low temperature (below 15), it is advisable to condition in the workshop for 24 hours before use to prevent condensation.
| Product code |
Strand tex(tex) |
Filament dia(μm) |
Moisture content(%) |
Size content(%) |
Breaking Strength(N/tex) |
Zirconia Content(%) |
| ARC15-98-(3-30mm)D |
98 |
15 |
<0.5 |
0.6-1.0 |
≥ 0.28 |
≥ 14.5% |
| ARC11-50-(3-30mm)HD |
50 |
11 |
<0.5 |
0.6-1.0 |
≥ 0.30 |
≥ 16.5% |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}