ARG Spray Roving ZrO2 16.7% 2500 TEX
Introduction:
Our alkali resistant fiberglass roving is an AR glass chopping roving mainly designed for use in the manufacture of GRC composites by the manual spray method. HUIERJIE SPRAY ROVING is designed for optimum processability. It is used in the manufacture of GRC architectural panels and other building elements, civil engineering and infrastructure components.
Properties:
Easy chopped, Good integrity, Excellent dispersibility and alkali resistant; Been approved by Sheffied University, UK.
Packing:
Each roll of AR-glass fiber spray roving weight 18kg. It is wrapped by a shrinking polythene film, then to be packed in one carton. 48 cartons or 64 cartons are to be packed in one pallet. 20 pallets (on two levels) are to be loaded in a 20 feet container, giving a total net weight of approximately 20 tons.
Other packing methods are available, according to customers' requirements.
Storage:
AR fiberglass spray up roving should be stored dry in their original package, best to be stored at a temperature of between 15º C and 35º C, and at a relative humidity of between 35 and 65%. If the product is stored at low temperature (below 15), it is advisable to put in the workshop for 24 hours before use to prevent condensation.
| Linear weight of roving (tex) |
Sizing Content |
Moisture |
Stifness |
Breaking strength (N/tex) |
| JC/T572-2002 |
JC/T572-2002 |
JC/T572-2002 |
JC/T572-2002 |
JC/T572-2002 |
| 2400±240 |
1.3±0.2 |
≤0.2 |
≥120 |
≥0.25 |
| 2700±270 |
1.3±0.2 |
≤0.2 |
≥120 |
≥0.25 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}